TERMION Bioprotection-Thermal insulation against mold
WHERE APPLICABLE
"TERMION BIOZASCHITA" is an innovative thermo-color for insulation of premises with high humidity. Used to protect and prevent surfaces from fungus, mold and condensation.
Harmless, eco-friendly material, water-based.
Antifungal additives, which are part of "TERMION BIOSHASCHITA", can eliminate fungus and mold, preventing their occurrence in the future.
TERMION BIOZASCHITA contains 80% of microglasses from glass ceramics 3M (France) and 20% micro-granules of silicone, high-quality acrylic base, antifungal components and other rheological additives.
OPERATING PRINCIPLE
The viscous fraction, consisting of a high-quality imported binder (dispersion), contains air-filled glass-ceramic microspheres with low thermal conductivity and silicone, antifungal components and rheological additives. When applied to the surface, the material is polymerized, the surface is covered with a film of vacuumed ceramic and silicone microspheres, forming a thermal barrier and eliminating condensation.
APPLICATION METHOD
Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
It is not recommended to apply TERMION BIOZASCHITA on painted surfaces.
For application, use a roller, brush or spray (airless).
The ambient temperature, when painting, should be in the range: + 5 ° C - + 40 ° C.
SPECIFICATIONS:
|
Indicators |
Values |
|
|
Color of the film (basic) |
White |
|
|
Appearance of the coating |
Matte, smooth, homogeneous |
|
|
Density g / cm³ |
0,55 |
|
|
Hiding power, g / m2 (state standard 8784-75) |
176 |
|
|
Calculated thermal conductivity W / m ° С |
0,0012 |
|
|
Heat dissipation W / m ° С |
3,9 |
|
|
Thermal resistance m2 * C \ W (at 1 millimeter) |
1,0 |
|
|
Coefficient of vapor permeability Mg / m h PA |
0,012 |
|
|
Adhesion coating (state standard 15140-78) |
1 score |
|
|
The flammability class (except for the modification of NG) |
G 1 |
|
|
|
|
|
Storage (in tightly closed containers) |
12 months |
|
|
Actual consumption (single-layer coating) l / m² |
0,8~1,0 |
|
|
Drying time, at a temperature (20 ± 2) ° С |
Dry from dust |
0,5 hours |
|
Full drying to grade 3 |
40 min |
|
|
Interlayer drying |
24hours |
|
|
Full polymerization |
48 hours |
|