TERMION Anticor-Anticorrosive thermal insulation for metal surfaces
WHERE APPLICABLE
Liquid insulator "TERMION ANTIKOR" has high anti-corrosion properties. It is used for surfaces that are prone to corrosion. Also, it is used as a primer coat for rusty surfaces and as a basis for other coatings of the Althermo series.
TERMION ANTIKOR is actively used for insulation:
- In piping systems, boilers, tanks and other structures
- In gas pipeline systems
- Products (technological)
- For chimneys (made of metal)
- For engine components
- For mechanisms and hull parts of ships
- For roofing metal structures
"TERMION ANTIKOR" on an organic basis, contains 80% microgranules of glass ceramics "3M" (France) rheological additives, and substances that inhibit corrosion (inhibitors).
OPERATING PRINCIPLE
The viscous fraction, consisting of a high-quality imported binder (dispersion), contains air-filled microspheres of glass-ceramic with low thermal conductivity, ultraviolet filters, rheological additives and corrosion inhibitors.
When applied to metal surfaces, the coating polymerizes, the surface is covered with a film of vacuumed ceramic microspheres, forming a thermal barrier.
APPLICATION METHOD
Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
It is not recommended to apply TERMION ANTIKOR to painted surfaces.
For application, use a roller, brush or spray (airless).
SPECIFICATIONS:
|
Indicators |
Values |
|
|
Color of the film (basic) |
White |
|
|
Solvent |
Orthoxylene, xylene |
|
|
Appearance of the coating |
Matte, smooth, homogeneous |
|
|
Density g / cm³ |
0,55 |
|
|
Hiding power, g / m2 (state standard 8784-75) |
176 |
|
|
Calculated thermal conductivity W / m ° С |
0,0012 |
|
|
Heat dissipation W / m ° С |
3,9 |
|
|
Thermal resistance m2 * C \ W (at 1 millimeter) |
1,0 |
|
|
Coefficient of vapor permeability Mg / m h PA |
0,012 |
|
|
Adhesion coating (state standard 15140-78) |
1 score |
|
|
The flammability class (except for the modification of NG) |
G 1 |
|
|
|
|
|
Storage (in tightly closed containers) |
12 months |
|
|
Actual consumption (single-layer coating) l / m² |
0,8~1,0 |
|
|
Drying time, at a temperature (20 ± 2) ° С |
Dry from dust |
0,5 hours |
|
Full drying to grade 3 |
40 min |
|
|
Interlayer drying |
24hours |
|
|
Full polymerization |
48 hours |
|
